LOG4 Analyser - Linux Install Guide



PC

Running: x64 Ubuntu 18.04

  1. Install "log4-analyser_2.4.1_amd64.deb"
  2. Open a terminal window and run the following commands to complete some additional installation steps

  3. cd ~/Downloads/log4-analyser_2.4.1_amd64/  # or wherever this folder was unzipped to
    chmod +x additional-linux-setup.sh
    ./additional-linux-setup.sh
    
  4. Log out and back in again to ensure your user account has serial port access.



ARMV8 x64 Linux

Running: Jetson Nano R32.2.1 Ubuntu or Raspberry Pi 4 Ubuntu 19.10 Server, 64bit

  1. Ensure a GUI (Raspberry Pi) is installed (if using new SD card image) - a reboot will be required afterwards

  2. sudo apt-get update && sudo apt-get dist-upgrade -y && sudo apt-get install ubuntu-desktop -y
    
  3. Install "log4-analyser_2.4.1_arm64.deb"
  4. Open a terminal window and run the following commands to complete some additional installation steps

  5. cd ~/Downloads/log4-analyser_2.4.1_arm64/  # or wherever this folder was unzipped to
    chmod +x additional-linux-setup.sh
    ./additional-linux-setup.sh
    
  6. Log out and back in again to ensure your user account has serial port access.



Raspberry Pi Ubuntu Image

  1. Flash the image file to a suitable microSD card (>16GB recommended) using a tool such as balenaEtcher.
  2. Insert this microSD card into your Pi, boot it up and log in using the default username 'ubuntu' and password 'tektyte'.

Resources


Datasheet
19/07/2017
PDF
Manual
25/03/2019
PDF
Datasheet
19/07/2017
PDF
Manual
25/03/2019
PDF
Datasheet
11/12/2018
PDF
FTDI Download Center
-
LINK [EXTERNAL]
V 1.0.0704
13/06/2018
ZIP
V 1.0.0704
14/06/2018
DMG

*Depreciated Softwares are no longer supported and are for reference only.

Jump to TOP

Quick Links

Your cart

Total
USD
Shipping and discount codes are added at checkout.